Foucault |
22 Series
|
|
|
|
Foucault |
22 Series
|
|
|
|
 sales@foucault.com |
 |
 |
 |
| TYPE | 22 ELD-FI 3.5 kVA | 22 ED-FI 3.5 kVA | 22 ESD-FI 3.5 kVA |
| Characteristics | Portable, easy to use, totally self-contained induction heater. Perfect for field service technicians working on-site or on-the-go. | Industrial non-swing arm Foucault Induction Heater. Suitable for maintenance and production applications. | Swing arm induction heater featuring our unique swing arm system, for faster and easier mountings - perfect for production and maintenance. |
| Capacity | 3.5 kVA | 3.5 kVA | 3.5 kVA |
| Voltage | 120/240 V-50/60Hz | 120/240 V-50/60Hz | 120/240 V-50/60Hz |
Pole Section  |
40mm/1.57" | 60mm/2.35" | 60mm/2.35" |
| Pole Height | 130 mm/5.11" | 140 mm/5.50" | 140 mm/5.50" |
| Max. bearing weight (±) | 10 kg/22 lbs. | 35 kg/77 lbs. | 35 kg/77 lbs. |
Max. bearing diameter  |
210mm/8.26" | 340mm/`13.38" | 340mm/13.38" |
| Max. bearing width | 120mm/4.72" | 150mm/5.90" | 150mm/5.92" |
| Temperature Control • max. reach • magnetic probe • digital display |
480°C/896°F yes yes |
480°C/896°F yes yes |
480°C/896°F yes yes |
| Time Control • max reach • digital display |
x 0-30 min. yes |
x 0-45 min. yes |
x 0-45 min. yes |
| Sound Signal | yes | yes | yes |
| Temperature hold | yes | yes | yes |
| Automatic demagnetization | yes - to less than 2 A/cm2 | yes - to less than 2 A/cm2 | yes - to less than 2 A/cm2 |
| Automatic power reduction | no | yes | yes |
| Dimensions (L x W x H) | 17.09" x 8.84" x 10.81" | 13.36" x 11.39" x 12.18" | 13.36" x 11.39" x 14.93" |
| Mass heater body | 21 kg/46.20 lbs. | 29 kg/63.80 lbs. | 31 kg/68.20 lbs. |
| Standard yokes, diameter mm |
10, 14, 20, 40 | 10, 14, 20, 30, 40, 50, 60 | 10, 14, 20, 30, 40, 50, 60 |
| Extension Yokes | no | 60x60x120 mm | 60x60x120 mm |
| WHY USE INDUCTION HEATING? • Correct mounting lengthens the life span of your bearings • Temperature and time can be preset and checked • Saves time and energy as preheating is unnecessary and inductive heating is quick • Perfect even heating of bearings • Safe: heater and yokes remain cool; only the workpiece is heated up; no accident prone hot oil, plates or blow torches • Healthy and environmentally friendly: no smoke, fumes or oil waste. • Bearings remain clean and retain original prelubrication • Ideal for 2RS-ZZ bearings • Bores remain cylindrical HOW DOES IT WORK?  An induction heater uses the principles of induction, comparable to a transformer. The core and windings are the primary side. The workpiece itself is a short circuited single turn secondary winding, which will increase in temperature, due to it acting as a shorted secondary. During the induction heating cycle a very small degree of residual magnetism will be generated; less than 5 gauss. All of our induction heaters further reduce these levels automatically down to less than 2 gauss. Independently tested and government approved. |
 |
Foucault InternationalTM |
